Single Post Car Parking Lift
1. Compact size design without the need for a manoeuvring area.
2. Ramps and tire stopper positions are interchangeable on both sides.
3. The hydraulic power unit and electric panel are reversible on the post sides.
4. Usability in corridors, aisles without blocking the road.
5. Possibility to remove the steel base to free up the floor by fixing the post from top and bottom to the wall by anchor flanges.
6. A hydraulic cylinder inside the post lifts the platform through a carriage and chain lifting system.
7. Well-engineered lift design automatically engages the safety lock latch at different heights when raising.
8. The electromagnetic lock release automatically activates during the descending phase (Down).
9. The platform runway is made of diamond steel plates and wave plates.
10. Product certified according to BS EN 14010: 2003 +A1: 2009 and EN 1493:2010.
11. Steel parts are shot blasted, then powder-coated with the desired colour.
Two Post Car Parking Lift
1. Dependent stack parking is designed to store two cars in one parking space.
2. A hydraulic power unit & electric panel with an outdoor cage provide safe operation.
3. Posts are shared for multiple connected units to save space and cost.
4. Two-stage dual hydraulic cylinders with carriages to lift the platform from both sides with a roller chain balance system.
5. Balance chains are covered by U-shaped steel underneath the platform.
6. Safety locks engage automatically inside post holes.
7. The electromagnetic lock releases through its own push button.
8. High polymer polyethylene sliding blocks, wear-resistant carriage bearings.
9. Dead-man push buttons & On/off key-switch mounted on the operation arm.
10. Audible buzzer & visual flasher alarm enhance safety during operation.
11. Wide-deck platform with galvanized wave plates accommodates pickups & vans.
12. One-piece low-profile diamond steel ramp facilitates the parking of sports cars.
13. Product certified according to BS EN 14010: 2003 +A1: 2009 & EN 1493:2010.
14. Steel parts are shot blasted, then powder-coated with the desired color.
Four Post Car Parking Lift
1. Multiple-use parking lift to double your car space.
2. Hydraulic cylinder with steel ropes & sheaves lifting system.
3. All posts are equipped with a steel ladder with holes of 100 mm pitch.
4. Safety locks engage automatically inside holes during lifting.
5. An additional safety lock is to be engaged automatically in case of rope/cable rupture.
6. Manual or electromagnetic lock release as per customer request.
7. Limit switches are fixed on posts to control lifting height.
8. High polymer polyethylene sliding blocks, wear-resistant.
9. Platform runway & ramps made of diamond steel plates.
10. Movable oil drip trays or galvanized wave plates in the middle.
11. Electric panel with integrated operation push button controls, 24 V.
12. Steel parts are shot blasted, then powder-coated with the desired color.